Verifying Tdm Pw - Cisco ASR 903 Manual

TDM
negotiation auto
mpls ip
!
interface CEM0/4/0
no ip address
cem 0
xconnect 172.16.2.2 1001 encapsulation mpls
!
!
router ospf 1
router-id 172.16.3.3
network 172.16.3.3 0.0.0.0 area 0
network 10.10.3.0 0.0.0.255 area 0
!
mpls ldp router-id Loopback0 force
!

Verifying TDM PW

ASR903-R2# show xconnect all detail
Legend: XC ST=Xconnect State
UP=Up
SB=Standby
XC ST Segment 1
------+---------------------------------+--+---------------------------------+--
UP pri ac CE0/5/0:0(SATOP E1)
ASR903-R2# show mpls l2transport vc 1001
Local intf
-------------
CE0/5/0
ASR903-R2# show mpls l2transport vc 1001 detail
Local interface: CE0/5/0 up, line protocol up, SATOP E1 0 up
Destination address: 172.16.3.3, VC ID: 1001, VC status: up
Output interface: Gi0/2/1, imposed label stack {0 22}
Preferred path: not configured
Default path: active
Next hop: 10.10.3.2
Create time: 01:10:31, last status change time: 00:51:21
Last label FSM state change time: 00:57:43
Signaling protocol: LDP, peer 172.16.3.3:0 up
OL-30526-01
DN=Down
HS=Hot Standby
Interworking: L2L
Local circuit
-------------------------- --------------- ---------- ----------
SATOP E1 0
S1=Segment1 State S2=Segment2 State
AD=Admin Down IA=Inactive
RV=Recovering NH=No Hardware
S1 Segment 2
UP mpls 172.16.3.3:1001
Local VC label 24
Remote VC label 22
Dest address
172.16.3.3
Cisco ASR 903 Router Design and Deployment Guide▄
Structure-Agnostic TDM over Packet (SAToP) ▀
VC ID Status
1001 UP
S2
UP
83