Vpls Hub-Spoke Configuration - Cisco ASR 903 Manual

Virtual Private LAN Service - VPLS
VPN ID: 30, VE-ID: 32, VE-SIZE: 10
RD: 100:30, RT: 100:30
Bridge-Domain 30 attachment circuits:
Neighbors connected via pseudowires:
Interface
pseudowire100023
pseudowire100024
PE-1# show mpls l2transport vc 30
Local intf
-------------
VFI VPLS30
VFI VPLS30

VPLS Hub-Spoke Configuration

VPLS use split-horizon to avoid loop so packets received in one VC are forwarded only to attachment circuits, not
to other VCs. However in the hub-spoke scenario, split-horizon prevents spoke sites communicating with each
other. In this case, it can be disabled.
PE-1 Configuration
l2 vfi VPLS30 manual
vpn id 30
bridge-domain 30
neighbor 10.10.3.3 encapsulation mpls
neighbor 10.10.2.2 encapsulation mpls
! Interface to CE-1
OL-30526-01
peer Address
10.10.2.2
10.10.3.3
Local circuit
------------------------ ----------------------- ---------- ----------
vfi
vfi
Figure 11. VPLS Hub-Spoke
VE-ID Local Label
32 30
33 31
Dest address
10.10.2.2
10.10.3.3
no-split-horizon
no-split-horizon
Cisco ASR 903 Router Design and Deployment Guide▄
VPLS Hub-Spoke Configuration ▀
Remote Label S
33 Y
35 Y
VC ID Status
30 UP
30 UP
71