Show Nlb Fdb - D-Link DGS-3620-52P Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
<vlan_name 32> - Enter the VLAN name of the NLB multicast FDB entry here. This name can be
up to 32 characters long.
vlanid - Specifies the VLAN ID used.
<vlanid> - Enter the VLAN ID used here.
<macaddr> - Specifies the MAC address of the NLB multicast FDB entry to be configured.
add - Specifies a list of forwarding ports to be added.
delete - Specifies a list of forwarding ports to be deleted.
<portlist> - Specifies a list of forwarding ports to be added or deleted.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure NLB multicast MAC forwarding database:
DGS-3620-28SC:admin# config nlb multicast_fdb default 03-bf-01-01-01-01 add
1:1-1:5
Command: config nlb multicast_fdb default 03-bf-01-01-01-01 add 1:1-1:5
Success.
DGS-3620-28SC:admin#
65-4

show nlb fdb

Description
This command is used to show the NLB configured entry.
Format
show nlb fdb
Parameters
None.
Restrictions
None.
Example
To display the NLB forwarding table:
708