Config Scheduling - D-Link DGS-3620-52P Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Granularity: TX: 64. Actual Rate: MAX: 64.
Success.
DGS-3620-28SC:admin#
81-4 show per_queue bandwidth_control
Description
This command is used to display the bandwidth control setting of per egress queue for each port.
Format
show per_queue bandwidth_control {<portlist>}
Parameters
<portlist> - (Optional) Specify a range of ports to be displayed.
Restrictions
None
Example
To display the port bandwidth control table for port 1:
DGS-3620-28SC:admin#show per_queue bandwidth_control 1
Command: show per_queue bandwidth_control 1
Queue Bandwidth Control Table On Port: 1
Queue Min Rate(Kbit/sec)
0 No Limit
1 No Limit
2 64
3 64
4 No Limit
5 No Limit
6 No Limit
7 No Limit
DGS-3620-28SC:admin#
81-5

config scheduling

Description
This command is used to configure the traffic scheduling mechanism for each CoS queue.
Max Rate(Kbit/sec)
No Limit
No Limit
1024
No Limit
No Limit
No Limit
No Limit
No Limit
888