Config Wac User; Show Wac - D-Link DGS-3620-52P Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
108-12

config wac user

Description
This command is used to change the VLAN associated with a user.
Format
config wac user <username 15> [vlan <vlan_name 32> | vlanid <vlanid 1-4094> | clear_vlan]
Parameters
<username 15> - Specify the name of user account which will change its VID.
vlan - Specify the authentication VLAN name.
<vlan_name 32> - Specify the authentication VLAN name. The VLAN name can be up to 32
characters long.
vlanid - Specify the authentication VLAN ID.
<vlanid 1-4094> - Specify the authentication VLAN ID. The VLAN ID must be between 1 and
4094.
clear_vlan - Specify to clear the specified VLAN.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the user's VLAN:
DGS-3620-28SC:admin# config wac user abc vlanid 100
Command: config wac user abc vlanid 100
Enter a old password:**
Enter a case-sensitive new password:**
Enter the new password again for confirmation:**
Success.
DGS-3620-28SC:admin#
108-13

show wac

Description
This command is used to display the WAC global setting.
Format
show wac
Parameters
None.
1102