Chapter 107 Vlan Trunking Commands - D-Link DGS-3620-52P Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Chapter 107 VLAN Trunking
enable vlan_trunk
disable vlan_trunk
config vlan_trunk ports [<portlist> | all] state [enable | disable]
show vlan_trunk
107-1 enable vlan_trunk
Description
This command is used to enable VLAN trunking. When VLAN trunking function is enabled, the
VLAN trunk ports shall be able to forward all tagged frames with any VID.
Format
enable vlan_trunk
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable VLAN trunking:
DGS-3620-28SC:admin#enable vlan_trunk
Command: enable vlan_trunk
Success
DGS-3620-28SC:admin#
107-2 disable vlan_trunk
Description
This command is used to disable VLAN trunking.
Format
disable vlan_trunk
Commands
1090