Codegate; Streaming Presentation™ Mode - Honeywell 1900GHD-2 User Manual

You may program a Streaming Presentation Mode (Normal, Enhanced, or
Mobile Phone) you wish to use for in-stand scanning, and a Manual Trigger
mode (Normal, Enhanced, or Mobile Phone) you wish to use for out-of-stand
scanning. To do this, you must first scan the preferred Streaming Presentation
mode (see below), then scan the Manual Trigger mode (see page 4-6 and page
4-14) you want to use.
®

CodeGate

When CodeGate is On, the trigger is used to allow decoded data to be transmit-
ted to the host system. The scanner remains on, scanning and decoding bar
codes, but the bar code data is not transmitted until the trigger is pressed.
When CodeGate is Off, bar code data is transmitted when it is decoded.
Default = CodeGate Off Out-of-Stand.
* CodeGate Off
Out-of-Stand
CodeGate On
Out-of-Stand
Streaming Presentation ™ Mode
When in Streaming Presentation mode, the scanner's aimer goes out after a
short time, but the scan illumination remains on all the time to continuously
search for bar codes. Two modes are available, Normal and Enhanced. Nor-
mal mode offers good scan speed and the longest working ranges (depth of
field). Enhanced mode will give you the highest possible scan speed but slightly
less range than Normal mode. Enhanced mode is best used when you require
a very fast scan speed and don't require a long working range.
Streaming Presentation Mode
- Normal
Streaming Presentation Mode
- Enhanced
When using Preferred Symbology (page 4-20), a lower priority symbol must be
centered on the aiming pattern to be read in Streaming Presentation Mode.
4 - 13