In-Stand Sensor Mode - Honeywell 1900GHD-2 User Manual

Scan Presentation Centering On, then scan one of the following bar
codes to change the top, bottom, left, or right of the centering window.
Then scan the percent you want to shift the centering window using digits
on the inside back cover of this manual. Scan Save. Default Presentation
Centering = 40% for Top and Left, 60% for Bottom and Right.
Presentation Centering On
Top of Presentation Centering
Window
Left of
Presentation Centering
Window

In-Stand Sensor Mode

This feature senses when the scanner is removed from the stand and tells it to
begin manual triggering. When Sensor On is enabled, the scanner defaults to
Streaming Presentation Mode when it is in the stand, and to Manual Trigger
Mode when it is removed from the stand. Default = Sensor On.
* Sensor On
Note: If you are taking images (see
1), you must set the In-Stand Sensor to Off.
4 - 12
* Presentation Centering Off
Right of Presentation Centering
Imaging Commands
Bottom of Presentation
Centering Window
Window
Sensor Off
beginning on page 8-