High Priority Symbology; Low Priority Symbology; Preferred Symbology Time-Out - Honeywell 1900GHD-2 User Manual

Scan a bar code below to enable or disable Preferred Symbology.
Preferred Symbology Off.
Preferred Symbology On

High Priority Symbology

To specify the high priority symbology, scan the High Priority Symbology
bar code below. On the
you want to set as high priority. Locate the Hex value for that symbology
and scan the 2 digit hex value from the Programming Chart (inside back
cover). Scan Save to save your selection. Default = None

Low Priority Symbology

To specify the low priority symbology, scan the Low Priority Symbology bar
code below. On the
want to set as low priority. Locate the Hex value for that symbology and
scan the 2 digit hex value from the Programming Chart (inside back cover).
If you want to set additional low priority symbologies, scan FF, then scan
the 2 digit hex value from the Programming Chart for the next symbology.
You can program up to 5 low priority symbologies. Scan Save to save your
selection. Default = None

Preferred Symbology Time-out

Once you have enabled Preferred Symbology and entered the high and low
priority symbologies, you must set the time-out period. This is the period of
time the scanner will search for a high priority bar code after a low priority
Symbology Chart
High Priority Symbology
Symbology Chart
Low Priority Symbology
* Preferred Symbology Off
on page A-1, find the symbology
on page A-1, find the symbology you
Default =
4 - 21