USER PROGRAMS
Settings for auditing accounts
Settings of user programs No. 10 to 15 varies with the program number. For
setting of all programs, first follow steps 1 to 3 in "Setting the user programs"
on page 46 to select a program. (1. Press the light (
seconds. 2. Enter a program number (10 to 15) using the numeric keys. 3.
Press the START key.) Then follow the appropriate instructions for the
program.
Program No. 10: Auditing mode
If the auditing mode is enabled, copying is limited to operators with an
assigned 3-digit account number. A maximum of 20, 3-digit account
numbers can be assigned. Use program No. 11 to register account numbers.
When program No. 10 is entered, the current setting (0: OFF, 1:ON) will
blink on the right side of the copy quantity display.
Program No. 11: Account number entry
Program No. 11 is used to register accounts. When program No. 11 is entered,
"– – –" will blink in the copy quantity display.
G
If the number of accounts has reached the upper limit (20), "11E" will
appear in the copy quantity display. Press the
return to step 2 on page 46.
48
) key for more than 5
1.
Select the desired setting using the numeric keys.
0:
OFF
1:
ON
2.
Press the START key.
G
The setting will be stored.
3.
To continue with other user programs, press the
and enter another program number. To exit the user
program mode, press the light (
key. The copier will
1.
Enter a 3-digit account number using the numeric keys.
G
Any 3-digit number except "000" can be registered as an account
number.
2.
Press the START key.
G
If a number that is already registered or "000" is entered, the number
will blink in the copy quantity display.
3.
Repeat steps 1 and 2 for other account numbers.
4.
To continue with other user programs, press the
and enter another program number. To exit the user
program mode, press the light (
key
) key.
key
) key.