Set-Up - Sharp AL-1611 Operation Manual

SET-UP

Remove all pieces of tape, then open the document
1
feeder cover or the platen cover and remove the
protective material.
Use a coin (or other suitable object) to remove the
2
screw.
Store the screw in the paper tray as described in step
6 because it must be used if the copier has to be moved.
(p. 61)
Install the TD cartridge.
3
G
For installation of the TD cartridge, see steps 1 and 2 and steps 4 to 7
of TD CARTRIDGE REPLACEMENT on pages 33 and 34.
Gently lift and pull out the paper tray until it stops.
4
Remove the pressure plate lock. Rotate the pressure
5
plate lock in the direction of the arrow to remove it
while pressing down the pressure plate of the paper
tray.
11