Table of Contents
Advertisement
USER PROGRAMS
For operation of these programs after
step 3, see page 48.
46
Setting the user programs
Press and hold the light (
1
seconds until all the alarm indicators (
) blink and "– –" appears in the copy quantity display.
Enter a program number using the numeric keys.
2
G
The selected program number will blink in the copy quantity display.
G
If a mistake is made in steps 2 to 4, press the CLEAR key. The copier
will return to step 2.
G
The program numbers are shown in the table below.
For example, to change the setting of the auto power shut-off timer,
press key 3.
Program name
Auto clear time
Preheat mode
Auto power shut-off timer
Stream feeding mode
Auto power shut-off setting
Auto paper select mode
Auto tray switching
Auditing mode
Account number entry
Account number change
Account number deletion
Number of copies per account
Resetting account
Press the START key.
3
G
For programs 1 to 9, the entered program number will be steadily lit
on the left side of the copy quantity display and the currently selected
parameter number for the program will blink on the right side.
G
For programs 10 to 15 (programs for auditing accounts), the display
varies with the program number. See page 48 for setting programs 10
to 15.
) key for more than 5
,
,
, and
Program No.
1
2
3
4
5
8
9
10
11
12
13
14
15
Advertisement
Table of Contents
