Table of Contents
Advertisement
SET-UP
Power on
12
Store the pressure plate lock which has been removed
6
Pressure
in step 5 and the screw which has been removed in
plate lock
step 2 in the front of the paper tray.
G
To store the pressure plate lock, rotate the lock to fix it on the
relevant location.
G
For AL-1622, follow steps 4 to 6 for both the upper and lower trays
except for storage of the screw.
Screw
Ensure that the power switch of the copier is in the OFF
7
position. Plug the power cord into the nearest outlet.
Turn the power switch on.
8
Load copy paper.
9
G
When loading copy paper for the first time, be sure to turn the power
switch on in advance.
G
For loading copy paper, see steps 2 to 4 of LOADING COPY
PAPER on page 13. If you use copy paper other than A4 (default
size), see pages 14 and 15.
G
If you use the copier in a country other than the
country where the copier was purchased, you will
need to make sure that your local power supply is
compatible with your model. If you plug the copier
into an incompatible power supply, irreparable
damage to the copier will result.
G
Only insert the power cord into a properly grounded
wall socket.
Do not use extension cords or power strips.
Connect the copier to a power outlet which is not used
for other electric appliances. If a lighting fixture is
connected to the same outlet, the light may flicker.
Advertisement
Table of Contents
