Sharp AL-1611 Operation Manual page 73

Digital laser copier
Hide thumbs Also See for AL-1611:
Table of Contents

Advertisement

4. FIRST-AID MEASURES
Route(s) of Entry :
Inhalation
: Remove to fresh air. If symptoms occur, consult medical personnel.
Skin Contact : Wash with soap and water for 15 minutes or until particle is removed.
If irritation does occur, consult medical personnel.
Eye Contact : Flush eyes immediately with water for 15 minutes. If irritation does occur, consult medical
personnel.
Ingestion
: Rinse with water and drink several glasses of water. If irritation or discomfort does occur,
consult medical personnel.
5. FIRE -FIGHTING MEASURES
Extinguishing Media : water, CO
Special Fire fighting Procedures : None
Fire and Explosion Hazards : Like most finely divided organic powders, it may form an explosive
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions
Environmental Precautions : None
Methods for Cleaning Up : Wipe off with paper or cloth. DO not use vacuum cleaner when a large
7. HANDLING AND STORAGE
Handling
Technical Measures
Precautions
Safe Handling Advice : Use of a dust mask is recommended when handling a large quantity of toner or
Storage
Technical Measures
Storage Conditions
Incompatible Products : None
8. EXPOSURE CONTROL/PERSONAL PROTECTION
Engineering Measures
Ventilation
Exposure limit values
OSHA-PEL (USA)
ACGIH-TLV (USA)
Personal Protective Equipment
Respiratory Protection : None required when used as intended in Sharp equipment.
Hand Protection
Eye Protection
Skin Protection
Other Protective equipment : Use of a dust mask and goggles are recommended when handling a
MATERIAL SAFETY DATA SHEET
Inhalation?
Skin?
No
, foam and dry chemicals
2
mixture.
: None
amount is released. It, like most finely divided organic powders, is capable
of creating a dust explosion.
: None
: None
during long term exposure, as with any non-toxic dust. Try not to disperse the
particles.
: None
: Keep container closed and Store in a cool and dry place.
Keep out of the reach of children.
: None required with intended use.
: 15mg/m³ (Total Dust) , 5mg/m³ (Respirable Dust)
: 10mg/m³ (Total Dust) , 3mg/m³ (Respirable Dust)
: None required when used as intended in Sharp equipment.
: None required when used as intended in Sharp equipment.
: None required when used as intended in Sharp equipment.
large quantity of toner or during long term exposure, as with any non-
toxic dust.
Ingestion?
No
Possible but very unusual.
Page: 2/4
Date Revised: Jun.28. 2002
Date Issued: Oct.18.2001
MSDS NO. F-30841
71

Advertisement

Table of Contents
loading

This manual is also suitable for:

Al-1622

Table of Contents