Table of Contents
Advertisement
USER PROGRAMS
The user programs allow the parameters of certain functions to be set,
changed, or cancelled as desired.
List of user programs
This copier has the following user programs.
Program No.
Program name
1
Auto clear time
2
Preheat mode
3
Auto power shut-off
timer
4
Stream feeding mode*
5
Auto power shut-off
setting
8
Auto paper select
mode*
9
Auto tray switching*
10
Auditing mode
11
Account number
entry
12
Account number
change
13
Account number
deletion
14
Number of copies
per account
15
Resetting account
* AL-1622 only
Description
Sets the auto clear time. The copier returns to the initial settings
when the auto clear time elapses after the last copy is made.
Sets the time that elapses before the copier enters the preheat
mode after any operation is made. See page 52.
Sets the time that elapses before the copier enters the auto power
shut-off mode after any operation is made. See page 52.
Enables or disables the stream feeding mode. See page 20.
Enables or disables the auto power shut-off mode. See page 52.
Enables or disables the auto paper selection. See page 7.
Enables or disables the automatic tray switching which occurs when
paper in a tray runs out. (This switching cannot switch to the bypass tray.)
Enables or disables the auditing mode, which controls access to
copier. See page 16.
Registers accounts for auditing mode.
Changes account numbers for auditing mode.
Deletes accounts for auditing mode.
Displays the total number of copies made against account numbers.
Resets all audit accounts or resets any desired individual account.
45
Advertisement
Table of Contents
