Table of Contents
Advertisement
REDUCTION/ENLARGEMENT/ZOOM
22
Manual
Place the original on the original table or in the document
1
feeder tray.
Use the PRESET RATIO selector (
2
zoom (
,
) keys to select the desired copy ratio.
G
To select a preset reduction or enlargement copy ratio, press the
or
key repeatedly until the indicator for the desired copy ratio is
lit.
A.
Preset reduction ratios are: 86%, 81%, 70%, and 50%.
B.
Preset enlargement ratios are: 115%, 122%, 141%, and 200%.
C.
Zoom ratios: Any ratio from 50% to 200% can be set, in 1%
increments. Press the
ratio, then press the
to increase the ratio.
G
When a zoom (
,
up and the zoom ratio will be displayed in the copy quantity display
for at least two seconds.
G
To verify a zoom setting without changing the zoom ratio, press and
hold down the copy ratio display (
the display will return to the copy quantity display.
G
To decrease or increase the zoom ratio rapidly, press and hold down
the
or
key. However the value will stop at the preset reduction
or enlargement ratios. To move beyond these ratios, release the key
and then press and hold it down again.
D.
Same-size reset: Press the
copy ratio returns to 100%.
Ensure that copy paper of the desired size is installed in
3
the paper tray.
G
AL-1622 only Use the ORIGINAL SIZE ENTER key to select the
original size. Copy paper of the appropriate paper size will be
automatically selected based on the original size and copy ratio. If the
selected PRESET RATIO indicator or the ZOOM indicator blinks,the
selected copy image is too large for the copy paper size. The desired
paper tray can also be selected by pressing the TRAY SELECT key.
Set the number of copies and press the START key.
4
,
) keys and the
or
key to set the approximate
key to decrease the ratio or the
) key is pressed, the ZOOM indicator will light
) key. When the key is released,
or
key repeatedly until the
key
Advertisement
Table of Contents
