Overview of Navigation and Controls
Alarm Setup and Alarm Activation
Go to alarm setup interface
Alarm setup
42
In "Detect" interface, the copy/paste function is only valid for
Note
the same type, which means you cannot copy a channel
setup in video loss mode to camera masking mode.
Figure 4-19 Menu of Camera Masking
Before operation, make sure you have properly connected alarm devices
such as the buzzer.
On the main menu, from Setting to Alarm, you can see the alarm setup
interface. See
Figure
Alarm interface is shown below. See
Alarm in: Allows you to select alarm input channel number.
4-20.
Figure
4-20.