Honeywell HD-16DVR-C User Manual page 128

Web Client Operation
112
Parameter Function
There are two options: VBR and CBR.
Bit Rate Type
Please note, you can set video quality in VBR mode only.
The value ranges from 1 to 6. Level 6 is the best video
Quality
quality.
In CBR mode, actual bit rate is limited by this value
The value only affects average bit rate in VBR mode.
Bit Rate
Please refer to recommend bit rate for the detailed
information.
Recommended Recommended bit rate value according to the resolution
Bit Rate and frame rate you have set.
Here you can set video brightness, contrast, hue,
saturation and gain.
Color Setting
The value ranges from 0 to 100. Default value is 50. See
Figure 7-27.
Here you can privacy mask the specified video in the
Cover area
monitor video.
(privacy mask)
System max supports 4 privacy mask zones.
You can enable this function so that the system overlays
the time information in the video window.
Time Title The OSD transparent value is not applicable in the current
DVR version.
You can use the mouse to drag the time tilte position.
You can enable this function so that the system overlays
channel information in the video window.
Channel Title The OSD transparent value is not applicable in current
DVR version.
You can use the mouse to drag the channel title position.
It is a shortcut menu button. You can copy current
channel setup to one or more channels. The interface is
Copy
shown as:
You can click the save button after you complete setup for
Save one channel, or you can complete the whole setup and
then click the save button.
Click this button to get device latest configuration
Refresh
information.
Click copy interface, the interface is shown as in
If you have completed the setup for channel 1, you can click 3 to copy the
current setup to channel 3. Or you can click 2, 3, and 4 to copy the current
setup to channel 2, channel 3 and channel 4.
Figure 6-29
.
Figure 6-29.