Honeywell HD-16DVR-C User Manual page 21

Various File
Switch Ways
Multi-channel
Playback
Display Modes
Zoom
Backup
Backup Mode
function
Network
Network control
Function
Motion Detection
Video Loss
Motion
Detection and
External Alarm
Alarm
Manual Alarm
Control
Alarm Input
Alarm Output
Alarm Relay
Interface USB Interface
Network
connection
RS485
Can switch to previous or next file or any file in current play
list.
Can switch to file on other channel of the same time (if
existing).
Supports continuous file playback; when a file is ended,
system automatically plays the next file in the current
channel
Support maximum 16-channel simultaneous playback.
Switch between adaptive window/full screen during playback
When in one-window full-screen playback mode, you can
select any zone to zoom in.
HDD backup
Support peripheral USB backup device. (Flash disk, portable
HDD and etc.)
Supports USB burner (extension function).
Supports network download and backup
Remote live view of all channels.
DVR configuration through web browser client
Upgrade or maintenance via web browser client
View alarm information such as external alarm, motion
detection and video loss
Supports network PTZ control
File download backup and playback
Duplex transparent COM
Intercom
Zone setup: 396 (PAL, 22×18) or 330 (NTSC, 22×15)
detection zones.
Various sensitivity levels
Can activate recording, external alarm or screen message
prompt in specified period.
Alarm can activate external alarm or screen message
prompt.
Can activate recording, external alarm or screen message
prompt in specified period.
Enables or disables alarm input channel.
Supports manual alarm output.
16-ch alarm input（Normal open or normal close）
6-channel relay output, including one controllable +12VDC
output
30VDC 2A，125VAC 1A（activation alarm ）
2 USB 2.0 ports
RJ45 10M/100M self-adaptive Ethernet port
PTZ control port
Supports various control protocols: KD-6, Scandome, Pelco-
D, Pelco-P, etc.
Honeywell
5