Honeywell Excel 10 W7752D User Manual page 67

NV name field name
nciApplVer not_used1
nciApplVer not_used2
nciCntrlSettings reserve
nciFcuConfig not_used
nciWallMod spare_field[0]
nciWallMod spare_field[1]
nvoFcuStatus not_used
nvoFcuStatus spare_field[0]
nvoFcuStatusP not_used
nvoFcuStatusP spare_field[0]
nvoSensor not_used
nvoStatus out_of_limits
nvoStatus open_circuit
nvoStatus out_of_service
nvoStatus mechanical_fault
nvoStatus feedback_failure
nvoStatus over_range
nvoStatus under_range
nvoStatus electrical_fault
nvoStatus unable_to_measure
nvoStatus fail_self_test
nvoStatus self_test_in_progress
nvoStatus Lock ed_out
nvoStatus manual_control
nvoStatus in_override
nvoStatus reserved1
nvoStatus reserved2
nvoUnitStatus econ_output
Table C5. Unused Variables for Excel 10 FCU Controllers
digital
engineering units:
state
English (metric) or states
or
plus range
value
UBYTE
UBYTE
7 bits
4 bits
UBYTE
UBYTE
3 bits
WORD
Same as nvoFcuStatus
Same as nvoFcuStatus
6 bits
Bit
Bit
Bit
Bit
Bit
Bit
Bit
Bit
Bit
Bit
Bit
Bit
Bit
Bit
Bit
Bit
SNVT_lev_percent
EXCEL 10 FCU CONTROLLER LNS PLUG-INS USER GUIDE
default
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Not used.
Not used.
Not used.
Not used
Reserved for future use.
Not supported
Not supported
Not supported
Not supported
Not supported
Not supported
Not supported
Not supported
Not supported
Not supported
Not supported
Not supported
Not supported
Not supported
Not supported
Not supported
Not supported
65
comments
EN2B-0285GE51 R0909