Tree Report - Linksys 4116 - EtherFast Switch User Manual

Chapter 1 Using the Cisco Multicast Manager
Figure 1-38

Tree Report

Using the Multicast Tree Report, you can draw and save multicast trees (called baselines). You can then
set up the CMM to draw trees that have been saved in the background, and report any changes (only
changes to Layer 3 devices are reported).
The drawing and saving of trees is covered in the
Note
If a multicast tree you are monitoring changes, a trap is generated. You can then view the baseline and
the changed tree. Changes are highlighted in the text and also in the drawing.
To generate a Multicast Tree Report:
Select a baseline (multicast tree) from the list.
Step 1
You can specify the maximum number of events to display.
Step 2
Click Select. The report contains any events that have occurred in the last 24 hours.
Step 3
OL-7348-01
SSG Report
Using the Multicast Manager Tool
"Show All Groups" section on page
User Guide for the Cisco Multicast Manager 2.3.3
1-61.
1-55