Chapter 1 Using The Cisco Multicast Manager; Solaris Installation Instructions - Linksys 4116 - EtherFast Switch User Manual

Solaris Installation Instructions

Sun Fire V210 with:
•
•
•
•
Sun Fire 280R with:
•
•
•
•
If the number of devices/S,Gs exceeds 500/5000, and/or other applications are installed on the system,
Note
then the requirements might be greater than shown here.
Intel PIII 1GHz (running RHEL AS 4) (Taroon Update 4) with:
•
•
Disk space requirements will vary depending on the size of the network, the number of devices being
Note
polled for thresholds, and how often log files are rotated. The following log files are generated by CMM
2.3(3):
<INSTALLDIR>/mmtsys/sys/events.log
<INSTALLDIR>/mmtsys/sys/rmspolld.log
<INSTALLDIR>/httpd_perl/logs/error_log
Solaris Installation Instructions
To install the CMM for Solaris 2.8 or Solaris 2.9, log in as the root user and follow one of the approaches
outlined below.
Approximately 300MB of disk space is required for installation.
Note
1.
User Guide for the Cisco Multicast Manager 2.3.3
1-2
Disk Space—300MB
Memory—1GB
Supports up to 300 devices
Supports up to 3000 S,Gs
Disk Space—300MB
Memory—1GB
Supports up to 500 devices
Supports up to 5000 S,Gs
Disk Space—300MB
Memory—512MB
Install the CMM in the following directory:
/opt/RMSMMT
If there is not enough room in the /opt directory, create the RMSMMT directory on another partition
and create a symbolic link to it from /opt. For example:
# mkdir /space/RMSMMT
# cd /opt
# ln -s /space/RMSMMT RMSMMT
# chown -h mmtuser:mmtuser RMSMMT
Chapter 1 Using the Cisco Multicast Manager
OL-7348-01