L2 Polling - Linksys 4116 - EtherFast Switch User Manual

Chapter 1 Using the Cisco Multicast Manager
Fields and Buttons
Restart
Group Filter Regexp
Refresh
Router
Units
High Threshold
Low Threshold

L2 Polling

You can add Layer 2 switches to the CMM individually, or you can import a list (see the
2 Switches to Discovery" section on page
packets inbound and/or outbound from any Layer 2 port.
You can also configure up to 50 different time of day thresholds for each port.
Figure 1-22
OL-7348-01
1-11). The CMM can monitor the total number of multicast
L2 Polling Configuration
Using the Administration Tool
Description
Restarts the polling daemon globally. Each time
you change a polling interval, click Restart.
Enter any part of the multicast address. Only those
that match appear.
Clears the Group Filter Regexp previously
entered.
Select the router name.
Select either packets per sampling period (pps) or
bits per sampling period (bps).
Enter the high threshold that, if exceeded,
generates a report.
Enter the low threshold that, if exceeded,
generates a report.
User Guide for the Cisco Multicast Manager 2.3.3
"Adding Layer
1-37