Sg Polling-By Device - Linksys 4116 - EtherFast Switch User Manual

Using the Administration Tool
The Current Source/Group Polling Configuration section shows you all monitored sources and
groups in a tabular format.
•
•
Each time a source and group exceeds a threshold, a trap is sent and a report is generated.
SG Polling—by Device
You can select a particular router using the The Device SG Polling Configuration page, and you can
configure which sources and routers to monitor on the specific device.
Figure 1-21
The Device SG Polling Configuration page contains:
Fields and Buttons
Refresh Status
Start
Stop
User Guide for the Cisco Multicast Manager 2.3.3
1-36
Under the Modify column, you can edit or delete a specific source and group.
Under the Time Threshold column, click on Time-Based Thresholds to configure up to 50
different time of day high and low thresholds for each source and group. Click the Set Thresholds
button to save your changes.
Device SG Polling Configuration
Chapter 1 Using the Cisco Multicast Manager
Description
The status line indicates how long the polling
daemon has been running and how it was started.
Click Refresh Status to update the status
information.
Starts the polling daemon globally.
Stops the polling daemon globally.
OL-7348-01