Figure - Linksys 4116 - EtherFast Switch User Manual

Chapter 1 Using the Cisco Multicast Manager
RP availability is configured within the Global Polling Configuration page (see the
Note
Configuration" section on page
generated within the RP Polling Report page (see the

Figure 1-16

The RP Polling Configuration page contains:
Fields and Buttons
Refresh Status
Start
Stop
Restart
Enable RP Group Add Delete Traps
OL-7348-01
1-23). A trap is sent if an RP becomes unavailable, and a report is
RP Polling Configuration
Using the Administration Tool
"RP Polling Report" section on page
Description
The status line indicates how long the polling
daemon has been running and how it was started.
Click Refresh Status to update the status
information.
Starts the polling daemon globally.
Stops the polling daemon globally.
Restarts the polling daemon globally. Each time
you change a polling interval, click Restart.
Click the checkbox to monitor all leaves and
joins, which are then reported within the RP
Polling Report page (see the
section on page 1-49).
User Guide for the Cisco Multicast Manager 2.3.3
"Global Polling
1-49).
"RP Polling Report"
1-29