Troubleshooting & Maintenance Procedures - Horizon Fitness E54HR User Manual

Troubleshooting & Maintenance Procedures
Your elliptical trainer is designed to be reliable and maintenance free. However, if you do experience
problems with your elliptical, please reference the troubleshooting guide listed below.
TROUBLESHOOTING
PROBLEM: There is no display on the console.
$©LUT_©IN: Check all power cord and wire connections (Check batteries E51 model only). Remove
the console and verify that the console cable is attached properly, making sure that the cable is
securely inserted into the console.
PROBLEM: The elliptical trainer makes a squeaking or chirping noise.
SOLUTION: Loosen all bolts attached during the assembly process, grease the threads and tighten
agai n.
PROBLEM. The resistance levels seem to be incorrect, seeming too hard or too easy (E52, E53,
E54HR models only).
SOLUT_OIN: Reset the console and allow the resistance to reset to the default position. Restart the
console and retry the resistance levels.
PROBLEM. Roller wheels appear to be leaving particles on the guide rails.
SOLUTION: This is considered normal wear of the elliptical wheels. To remove, simply wipe off the
roller wheels and guide rails with a damp cloth. Add silicon to guide rails.
34