Measures - Sharp FO-130 Operation Manual

GENERAL CORRECTIVE MEASURES
Problem
Check and remedy
I
(continued)
/
l
If the receiving machine is in manual mode with no at-
tendant, reception will not be possible.
i
l
If the receiving machine is not a Sharp model, make
sure it is G3 compatible.
~
l
Check the display for error messages.
A distorted image is received at
l
Noise in the telephone line may cause distortion. Try
the other end.
sending the document again.
I* Mk a e a copy of the document on your machine. If the
1
copy is also distorted, your machine may have a prob-
I
tern.
Nothing is printed when you try to
l
Make sure that the recording paper is properly loaded
receive a document.
in your unit.
/
l
Make sure the power is on.
~
1
l
Make sure that the document for transmission is
loaded face down in the feeder of the other machine.
The recording paper does not 1
l
Make sure the paper is not jammed (see "Clearing
come out.
jammed recording paper" in this chapter).
The received image has low con-
i
l
Make sure that the specified recording paper is used
trast.
(see "Recommended paper" in Chapter 7).
I
l
Ask the other party to send higher contrast docu-
ments. If the contrast is still too low, your machine
may have a problem. Make a copy to check it.
_~-
l
Noise in the telephone line may cause distortion.
Received images are distorted.
Have the other party try sending the document again.
1 (continued)
8-2 TROUBLESHOOTING