Troubleshooting - Sharp FO-130 Operation Manual

Problem
I
Check and remedy
Nothing appears on the display.
I
l
Make sure the power cord is properly connected.
,
l
Make sure the power switch has been switched to the
I correct position.
i
l
Connect another electrical appliance to the outlet to
see if it is live.
The machine does not respond to
. If a beep sound (input or error signal) is not made
!
any key operation.
when the keys are pressed, turn off the power and
then turn it back on several seconds later.
Automatic document feeding
l
Check the size of the document (see "About the
does not work (for transmission or
original" in Chapter 3).
copying).
I
Dialing cannot be done.
l
Make sure the power is on.
I
l
Make sure that the line is properly connected to the
jack.
~
l
Make sure that the setting of the line selector is cor-
rect (touch-tone or dial pulse).
Nothing is printed on the receiv- j .
Make sure that the document for transmission is
ing end.
placed face down in the feeder.
I
I
l
Make sure that the recording paper is properly loaded
in the receiving machine.
The power is on, but no transmis-
)
l
Make sure that the receiving machine has recording
sion takes place.
~
paper.
(continued)
TROUBLESHOOTING 8-l