Basic Operations; About The Original - Sharp FO-130 Operation Manual

Table of Contents

Advertisement

About the original
Your FO-130 can transmit most standard office documents.
Specific guidelines
are as follows:
SIZE AND WEIGHT
The size and weight of documents which you can load in the document feeder depends on whether
you load one sheet at a time or several sheets at once.
1) When you load several sheets at once:
Width:
148 to 216 mm
Length:
128 to 197 mm
Thickness:
0.06 to 0.12 mm
Weight:
52 to 104 g/m'
2) When you load one sheet at a time:
Width:
148 to 216 mm
Length:
128 to 1000 mm
Thickness:
Weight:
)j
Note:
0.06 to 0.20 mm
52 to 157 g/m'
l
To send documents smaller than the minimum size. use the document carrier as described in "Using
the document carrier" which follows in this section.
OTHER RESTRICTIONS
l
Documents
written in yellow, greenish yellow, or light blue ink cannot be trans-
mitted.
l
Ink, glue, and correcting
fluid on documents
must be dry before they are trans-
mitted.
l
All clips, staples, and pins must be removed from documents before transmission.
If these are not removed, they may damage the machine.
l
Patched or taped documents
should be copied on a copy machine, and the copy
used for transmission.
BASIC OPERATIONS
3-1

Advertisement

Table of Contents
loading

Table of Contents