Installation - Sharp FO-130 Operation Manual

Take the following points into consideration when selecting a site for your FO-130:
ENVIRONMENT
The machine must be installed on a level surface.
Keep the machine away from air conditioners, heaters, direct sunlight, and dust.
Provide easy access to the front, back, and sides of the machine. In particular, keep
the area in front of the machine clear, or the original document may jam as it comes
out after scanning.
The temperature should be between 5" and 35°C.
The humidity should be between 30% and 85% (without condensation).
ELECTRICITY
A 240 V, 50 Hz, grounded (3-prong) AC outlet is required.
J#
Note:
l
If your area experiences a high incidence of lightning or power surges, we recommend that you
install a surge protector for the power and telephone lines. Surge protectors can be purchased at
most telephone specialty stores.
TELEPHONE JACK
A standard telephone wall jack must be located near the machine.
INSTALLATION
2-1