Restoring The Factory Default Configuration - Cisco NSS2000 - Gigabit Storage System Chassis Administration Manual

Maintaining the NSS

Restoring the Factory Default Configuration

Restoring the Factory Default Configuration
STEP 1
STEP 2
Cisco Small Business NSS2000 Series Administration Guide
There are two ways to restore configuration settings when you run into a problem
with the NSS: preserve the specific storage configuration but restore everything
else to factory defaults, or reset just the network settings so that you can log into
the NSS configuration interface.
!
To reset the NSS:
From the Manager Menu, click Admin
Depending on the nature of the problem, choose one of the following ways to
reset the configuration:
•
Delete the entire configuration with the exception of the storage details:
When you reset the configuration through the configuration interface, the
RAID, volume, share, and quota configuration is maintained. All other
configuration details are restored to factory defaults. Click Restore All
Settings to Factory Defaults.
CAUTION: If you restore the full factory
defaults to an NSS in a virtualized setup, you
will break any virtualized RAIDs.
Maintenance.
7
125