Configuring The Timing Settings - Cisco NSS2000 - Gigabit Storage System Chassis Administration Manual

Maintaining the NSS

Configuring the Timing Settings

Configuring the Timing Settings
STEP 1
STEP 2
Cisco Small Business NSS2000 Series Administration Guide
When you first configure the NSS, ensure that the NSS has successfully
synchronized the time with the NTP server. When the NSS is synchronizing with
the NTP time server, the "Synchronizing time with NTP server" message appears
and the Update button is grayed out. After the synchronization is complete, you
can manually refresh the page by reselecting the NTP Configuration page from the
Manager Menu. If the synchronization failed, the following occurs:
•
An error message stating "Could not synchronize with NTP server(s)"
appears in the NTP Configuration page.
•
The system alert message "Could not synchronize with NTP server(s)"
appears in the System Status page.
•
If the SNMP traps are configured, an SNMP trap message is sent.
To configure the time settings for the NSS:
From the Manager Menu, click Admin
The NTP Configuration page appears.
To use an NTP server to maintain the NSS time, click Automatically (via NTP). To
assign the time manually, skip to step 4.
Time.
7
134