Configuring The Nss For Ftp Access - Cisco NSS2000 - Gigabit Storage System Chassis Administration Manual

Managing the Shares

Configuring the NSS for FTP Access

STEP 5
Configuring the NSS for FTP Access
Cisco Small Business NSS2000 Series Administration Guide
sent immediately. The benefit of enabling this feature is that it is more efficient. The
downside of enabling this feature is that there is a potential for permanent data
loss should the NSS suffer an unexpected power loss or if the NFS client crashes.
Click Update.
You can configure the NSS to allow the FTP protocol to be used for file transfers
between the NSS over the Internet. The NSS supports both FTP (faster but not as
secure) and FTPS (not as fast as FTP but more secure). Note that the NSS only
supports Explicit FTPS (versus Implicit FTPS). The NSS does not support SFTP.
After you globally enable FTP access, you can allow or disallow FTP access on a
per-share basis.
To set up the FTP protocol:
NOTE: The default setting is to disable FTP
access. You must enable FTP access before
your users can access the NSS storage through
FTP regardless of their per-share settings.
6
110