Starting Nas Configuration; Windows Operating System - Cisco Smart Storage NSS322 Quick Start Manual

Starting NAS Configuration

8
Before you begin to use the Setup Wizard, make sure that you have a
computer that meets the following requirements:
• Internet connectivity (optional). The following browsers are supported:
– Microsoft Internet Explorer 7.0 or later
– Mozilla Firefox 3.0 or later
– Apple Safari 3.0 or later
• Supported operating systems:
– Windows 2000, XP, Vista, Server 2003, Server 2008, Windows 7
– Mac OS X 10.4 or later
– Unix or Linux 2.6 or later

Windows Operating System

If you are using a Windows operating system, you can configure the Smart
Storage by using the Setup Wizard. See the following section:
• System Configuration Using the Windows Setup
advanced users, the Setup Wizard guides you through the initial
configuration settings.
Mac OS X or Linux Operating System
If you are using a Mac OS X or Linux operating system, see the following
sections:
• System Configuration Using the Mac Setup
Wizard guides you through the initial configuration settings.
• System Configuration Using Linux or Mac OS
that uses more default settings.
System Configuration Using the Windows Setup Wizard
After connecting the equipment and pressing the Power button, the
system takes a few minutes to initialize. Listen for one beep. Wait a minute
until you hear a second beep. The power light will turn solid green. The
NAS device has started successfully and you can configure the device
using the First Time Installation Wizard.
If you receive Windows firewall warnings during this process, you
N
OTE
may need to allow the installation application to unblock the firewall
settings. If the installation does not start, you may also have to temporarily
disable any security software on your computer to run the Setup Wizard.
12 Cisco Small Business NSS322 Smart Storage
Wizard—For more
Wizard—The Setup
X—Quick installation