Cisco NSS2000 - Gigabit Storage System Chassis Administration Manual page 132

Maintaining the NSS
Upgrading the NSS Firmware
STEP 5
STEP 6
STEP 7
Cisco Small Business NSS2000 Series Administration Guide
Click Upgrade Firmware to initiate the upgrade process. During the upgrade, the
Power LED alternates from yellow to green.
When the firmware upgrade completes, the system automatically reboots. Wait
until the Power LED is solid green before you log back into the configuration
interface. If the upgrade is not successful, a message appears. (The Power LED
appears solid yellow until you click OK after which the system reboots with the
current version of the firmware.)
For more information about the behavior of the Power LED, refer to the
Buttons" section on page123
After the firmware upgrade is complete, we recommend that you clear your
browser cache before you reconnect to the administrator interface.
.
7
"LEDs &
124