Identifikationssysteme Gmbh - AEG ARE I2 Installation Manual

Manual
Page 25 / 33- Revision 01
ARE I2 / RS 232 – Installation Guide
•
Wait for the answer
•
Analyse the received answer: 3 characters plus <CR>.
<ACK> <CR>
<NAK> <CR>
<NOT> <CR>
The result of the writing process may also seen at the LED's.
•
LED L2 lit, if there was a successful write
•
LED L3 lit, if there was no successful write.
Example
WD <SP> 20 <SP> < 0 1 2 7 A C D F > <CR>
Allowed Values (block numbers of the transponder IC):
ALGO 9 (1kBit Memory)
ALGO 6 (2kBit Memory)
Writing process was successful
Writing process was not successful.
The response of the transponder was not readable.
Write to block 20
3 .... 31
16 ... 63
AEG

Identifikationssysteme GmbH

Söflinger Straße 100
D-89077 Ulm
Tel. ++49(0)731-933-1340/1877
Fax ++49(0)731-933-1855
e-mail: info@AEGID.de