Manual
Page 19 / 33- Revision 01
ARE I2 / RS 232 – Installation Guide
6.6
EC- Echo
The command EC changes of the echo function setting.
Input format:
Parameter:
Output (example):
Note:
6.7
BD- Baudrate
The command BD enables the change of the baud rate. The settings are effective after a warm
start using the RST command.
Input format:
Parameter:
Output (example):
EC <SP> parameter <CR>
v
Function
0
echo on
1
echo off
0 <CR>
The default value of the parameter EC depends on the particular
reader.
BD <SP> parameter <CR>
Parame-
Function
ter
0
4800 baud
1
9600 baud
2
19200 baud
2 <CR>
AEG
Identifikationssysteme GmbH
Söflinger Straße 100
D-89077 Ulm
Tel. ++49(0)731-933-1340/1877
Fax ++49(0)731-933-1855
e-mail: info@AEGID.de