Visual Signal Lamps - AEG ARE I2 Installation Manual

Manual
Page 14 / 33- Revision 01
ARE I2 / RS 232 – Installation Guide
5

Visual Signal Lamps

To show the operational state or results there are 5 LED at the
side of the housing.
L1: twinkles, if the processor works.
L2: lit, if the latest reading process was successful
L3: lit, if the latest reading process was a NoRead
L4: lit, if the reader receives data's at the serial data
port ( Rx )
L5: lit, if the reader sends data's at the serial data port
( Tx )
ID
BFH
Moderne elektronische
Objekterkennung und Verfolgung
ARE I2
L 1
L2
L3
L4
L5
AEG
Identifikationssysteme GmbH
Söflinger Straße 100
D-89077 Ulm
Tel. ++49(0)731-933-1340/1877
Fax ++49(0)731-933-1855
e-mail: info@AEGID.de