Voice Provisioning Settings - Cisco SPA112 Administration Manual

Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide

Voice Provisioning Settings

Use the Voice > Provisioning page to configure various profiles and parameters.
To open this page: Click Voice on the menu bar, and then click Provisioning in the
navigation tree.
Enter the settings as described below. After making changes, click Submit to save
your settings, or click Cancel to abandon any unsaved entries.
Configuration Profile
Field
Provision Enable
Resync On Reset
Resync Random
Delay
Resync Periodic
Description
Controls all resync actions independently of firmware
upgrade actions. Set to Yes to enable remote
provisioning. Default setting: Yes
Triggers a resync after every reboot except for reboots
caused by parameter updates and firmware upgrades.
Default setting: Yes
The maximum value for a random time interval that the
ATA waits before making its initial contact with the
provisioning server. This delay is effective only on the
initial configuration attempt following power-on or reset.
The delay is a pseudo-random number between zero
and this value.
This parameter is in units of 20 seconds; the default
value of 2 represents 40 seconds. This feature is
disabled when this parameter is set to zero.
This feature can be used to prevent an overload of the
provisioning server when a large number of devices
power-on simultaneously. Default setting: 2 (40
seconds)
The time interval between periodic resyncs with the
provisioning server. The associated resync timer is
active only after the first successful synchronization
with the server.
Set this parameter to zero to disable periodic
resynchronization. Default setting: 3600 seconds
4
58