Configuring Voice
Configuring Voice Settings
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide
Use the Voice pages to view and configure the voice settings for your ATA. These
pages are described in the following sections:
•
Voice System Information
•
Voice System Settings
•
Voice Provisioning Settings
•
SIP Settings
•
Voice System Regional Settings
•
Line 1 and Line 2 Settings (PHONE1 and PHONE2)
•
User Settings (User 1 and User 2)
Voice System Information
Use the Voice > Information page to view information about the ATA voice
application.
To open this page: Click Voice on the menu bar, and then click Information in the
navigation tree.
Enter the settings as described below. After making changes, click Submit to save
your settings, or click Cancel to abandon any unsaved entries.
Product Information
Field
Product Name
Serial Number
Software Version
Hardware Version
MAC Address
Client Certificate
Description
Model number/name.
Product serial number.
Software version number.
Hardware version number.
MAC Address. For example: 8843E1657936.
Status of the client certificate, which can indicate if
the ATA was authorized by your ITSP.
4
52