Cisco SPA112 Administration Manual page 100

Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide
Field
CWCID Serv
Call Return Serv
Call Redial Serv
Call Back Serv
Three Way Call Serv
Three Way Conf Serv
Attn Transfer Serv
Unattn Transfer Serv
MWI Serv
VMWI Serv
Speed Dial Serv
Secure Call Serv
Referral Serv
Description
Enable Call Waiting Caller ID Service Default
setting: Yes
Enable Call Return Service Default setting: Yes
Enable Call Redial Service.
Enable Call Back Service.
Enable Three Way Calling Service. Three Way
Calling is required for Three Way Conference and
Attended Transfer. Default setting: Yes
Enable Three Way Conference Service. Three
Way Conference is required for Attended
Transfer. Default setting: Yes
Enable Attended Call Transfer Service. Three
Way Conference is required for Attended
Transfer. Default setting: Yes
Enable Unattended (Blind) Call Transfer Service.
Default setting: Yes
Enable MWI Service. MWI is available only if a
Voice Mail Service is set-up in the deployment.
Default setting: Yes
Enable VMWI Service (FSK) Default setting: Yes
Enable Speed Dial Service. Default setting: Yes
Secure Call Service. If this feature is enabled, a
user can make a secure call by *18 before dialing
the target number. Then audio traffic in both
directions is encrypted for the duration of the
call. Default setting: Yes
Note: To enable secure calling by default, without
requiring a star code, set the user's Secure Call
Setting to Yes. See User Settings (User 1 and
User 2), page 108.
Enable Referral Service. See the Referral
Services Codes parameter For more information.
Default setting: Yes
4
100