Table of Contents
Advertisement
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Choose On-Line > Go On-Line to initiate communication with the LTC 8200. A green status bar
should appear at the bottom of the screen.
The following example changes camera numbers to Camera 16 through Camera 31.
Figure 50.
Camera Number Change
Make any necessary changes to the camera ports and click Download to update the LTC 8200 with
these changes.
Upgrading the Bosch IntuiKey Keyboard
The IntuiKey series has two distinct software images: the operating system firmware and a
language table image. Cisco provides a language table image that can be downloaded to the
keyboard to enhance the keyboard functionality and interaction with the ISP. This same image is
used in a virtual matrix switch solution.
To download the latest firmware and to obtain more information upgrade procedures, visit the
Bosch website.
Requirements:
●
The keyboard must be running firmware release 1.7x. The version is displayed on the
keyboard when it boots up.
●
Windows PC with a serial port.
●
Industry-standard 9-pin female to 9-pin female RS-232 null modem cable.
●
IntuiKey downloader program.
●
IntuiKey configuration software.
●
The current hybrid language table file, which may be obtained from the Software Download
page at http://www.cisco.com. A valid ID CCO is required to download this file.
Design Guide
6-5
Page-6-5
Advertisement
Table of Contents
