Table of Contents
Advertisement
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
As shown in Figure 29, ISP_1 is configured as the time master and by specifying the proper serial
communications parameters, the matrix switch acts as the time source for ISP_1 and the video
surveillance environment. In this case, the matrix switch connectivity is configured for a baud rate
of 9600 bps, 8 data bits, no parity, and 1 stop bit.
Figure 29.
Time Synchronization from Matrix Switch
Figure 30 shows how to configure an ISP to act as the time master for the environment. In this
example, the Internal ISP clock is used as the reference time.
Figure 30.
Time Synchronization with Internal clock
Design Guide
5-8
Page-5-8
Advertisement
Table of Contents
