Table of Contents
Advertisement
Design Guide
Chapter 5: Basic Configuration
This section describes the general steps that are required to configure a hybrid integration with a
matrix switch. Detailed configurations for matrix switches from various manufacturers are provided
in Chapter 6.
Configuring the Integrated Services Platform
To configure an ISP for use in a hybrid environment, it must be configured with the proper mode
and IP address and each of the encoder ports must be configured with the proper video resolution
and frame rate.
Using the Stream Manager Configuration Module, select the ISP and configure it with the proper
device name and mode. In Figure 18, ISP_1 has been configured as Time Master. For more details
about Time configurations, see the "Time Synchronization" section.
Figure 18.
Device Settings
Click the Network Settings tab and configure the proper IP address, as shown in Figure 19.
5-1
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page I
Advertisement
Table of Contents
