Table of Contents
Advertisement
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Each encoder port must be enabled and configured with the proper camera or peripheral ID and
video settings. In Figure 21, Port 4 has been configured as Camera ID 4, 4CIF Video Resolution,
and 30 fps Frame Rate.
Figure 21.
Port Video Settings
Configuring the Cisco Hybrid Decoder
Using the Stream Manager Configuration Module, configure each hybrid decoder in the hybrid
environment. To do so, choose the proper hybrid decoder and click Device Settings. Figure 22
shows a hybrid decoder configuration that includes a device name and a blank Pool field. For more
details about hybrid decoder pools, see the section on "Hybrid Decoder Pools".
Figure 22.
Device Settings
Click the Network Settings tab and configure the proper IP address, as shown in Figure 23.
Design Guide
5-3
Page-5-3
Advertisement
Table of Contents
