Table of Contents
Advertisement
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Configure the Stream Manager Administration and Monitoring Module
The Stream Manager Administration and Monitoring Modules provide system health information
and central alarm management capabilities. Its features include:
●
Real-time status, including server use and bandwidth use, of all Cisco Video Surveillance
devices in the network.
●
On-demand status reports that include information about video loss, recording status, raid
alarm, and hard disk drive failures.
In addition, the Administration and Monitoring with Failover Module provides failover capabilities
that minimize the loss of video recording if a device fails. The Administration and Monitoring with
Failover Module transfers video streams from a failed ISP to a failover ISP. If only one video
channel fails to record, the system switches only that video stream to the failover ISP.
Figure 37 shows the Main screen of the Administration and Monitoring with Failover Module, with
ISP_2 acting as a failover recorder. Because no failures have been detected, the five ports
dedicated for failover are idle.
Figure 37.
Administration and Monitoring with Failover Module
To configure the Administration and Monitoring with Failover Module to detect failures in specific
conditions, choose Tools > Options > Failover.
Design Guide
5-13
Page-5-13
Advertisement
Table of Contents
