Chapter 6
Connecting Interface Cables on the ASA 5500, ASA 5510, ASA 5520, and ASA 5540 Platforms
Powering On the Adaptive Security Appliance
Step 1
Step 2
What to Do Next
78-19186-01
Connect the other end of the cable to a network device, such as a router,
b.
switch, or hub.
To power on the adaptive security appliance, perform the following steps:
Connect the power cord to the adaptive security appliance and plug the other end
to the power source.
Power on the chassis.
Continue with
Chapter 7, "Configuring the Adaptive Security Appliance."
Powering On the Adaptive Security Appliance
Cisco ASA 5500 Series Getting Started Guide
6-9