About The Factory-Default Configuration; About The Adaptive Security Device Manager - Cisco 515E - PIX Restricted Bundle Getting Started Manual

Setting Up the Security Appliance

About the Factory-Default Configuration

About the Adaptive Security Device Manager

PIX 515E Security Appliance Getting Started Guide
1-6
Cisco security appliances are shipped with a factory-default configuration that
enables quick startup. The factory-default configuration automatically configures an
interface for management so you can quickly connect to the device and use ASDM to
complete your configuration.
By default, the security appliance management interface is configured with a default
DHCP address pool. This configuration enables a client on the inside network to
obtain a DHCP address from the security appliance to connect to the appliance.
Administrators can then configure and manage the security appliance using ASDM.
Chapter 1 Installing and Setting Up the PIX 515E Security Appliance
78-17645-01