Rack-Mounting The Chassis - Cisco 5510 - ASA SSL / IPsec VPN Edition Getting Started Manual

Installing the Chassis

Rack-Mounting the Chassis

Note
Step 1
Step 2
Cisco ASA 5500 Series Getting Started Guide
3-4
To rack-mount the chassis, perform the following steps:
You can use the mounting brackets to mount the chassis to the front or the back
of the rack, with the front panel or the rear panel of the chassis facing outward.
Attach the rack-mount brackets to the chassis using the supplied screws. Attach
the brackets to the holes as shown in
the chassis, you can rack-mount it.
Figure 3-2 Installing the Right and Left Brackets
L N K
3
2
Attach the chassis to the rack using the supplied screws, as shown in
Figure 3-2. After the brackets are secured to
1
Chapter 3 Installing the ASA 5550
Figure
78-19186-01
3-3.