Configuring Address Pools - Cisco 5510 - ASA SSL / IPsec VPN Edition Getting Started Manual

Chapter 9 Scenario: IPsec Remote-Access VPN Configuration
Implementing the IPsec Remote-Access VPN Scenario

Configuring Address Pools

For remote clients to gain access to your network, you must configure a pool of
IP addresses that can be assigned to remote VPN clients as they are successfully
connected. In this scenario, the pool is configured to use the range of IP addresses
209.165.201.1–209.165.201.20.
In Step 6 of the VPN Wizard, perform the following steps:
Enter a pool name or choose a preconfigured pool from the Pool Name drop-down
Step 1
list.
Alternatively, click New to create a new address pool.
The Add IP Pool dialog box appears.
Cisco ASA 5500 Series Getting Started Guide
9-10
78-19186-01